Importing and exporting presets on the Reverb and Echosystem

1) Make sure the card isn't locked.  There will be a switch on the left side of the looper.  This is prone to breaking off and rendering the SD card unusable, sometimes an SD card with a broken switch will work sporadically. 

2) Reformat the SD card to FAT32 with allocation unit size set to the highest setting (usually 64kB). 

Windows picture instructions for that can be found below. If you are using a Mac, download the 3rd party SD Memory Card Formatter app, since Mac Disk Utility does not offer an allocation unit size option.

3) To export presets to the SD card, make a directory in the root directory of the SD card called "from_reverb". On startup, Reverb will populate this directory with presets and the advanced config settings.

To import presets from the SD card, make a directory in the root directory of the SD card called "to_reverb". Presets that are named NN_reverb.bin when NN is a number between 0 and 35 inclusive will be loaded into Reverb memory.

4) Insert the SD card then power on the pedal.