6.10 ( Dec 04, 2024) -------------------- - Looper no longer uses the first 1GB on the SD card. - This will prevent SD cards with a single partition from being considered corrupt by the bootloader on the pedal, and by windows. - Because SD cards can have multiple partitions, and store much more than 1GB, we cannot guarantee the safety of data stored on an SD card when used with the looper. 6.09 ( Jun 15, 2023) -------------------- - Flash Driver Update 6.08 ( Feb 28, 2022 ) --------------------- - Board version update for Reverb 09a 6.07 ( Oct 19, 2021 ) --------------------- - Pedal now compatible with alternative DAC hardware addresses (MCP4728A0) - Fixed issue with external taps freezing pedal at startup. 6.06 ( June 9, 2021 ) --------------------- - V30 looper now works with V6 cards 6.05 ( May 15, 2021 ) --------------------- - Updated audio path testing parameters. 6.04 ( Apr 30, 2021 ) --------------------- - Updated automatic version detection system used for internal inventory tracking system 6.03 ( Mar 18, 2021 ) --------------------- - Changed how tones get outputted during testing. - Updated versions to work with new manufacturing run of boards. - Transformer relay gets 'exercised' when switching bypass mode (preventative maintenance measure). - Added test for pots with detents to tester. 6.02 ( Sep 30, 2020 ) --------------------- ( Note this doesn't change anything for the user. No need to update ) - Fixed bug with tester (right output transformer switching) - Add audio path debug tones to tester. 6.01 ( Sep 9, 2020 ) ----------------------- - Fixed bugs with tester (white led, midi tests) - Fixed firmware display at startup. 6.00 ( September 23, 2019 ) ---------------------------- - Added Freezification mode (ambient red). The select stomp provides the freezification of the sound, thing 1 sets the transition speed, thing 2 sets the frozen sound level. - Added Skitter mode (delay + reverb yellow). Thing 1 sets the diffusion, thing 2 sets the size. This sounds like delays that morphs into reverb. - Added SEED mode (ambient yellow). Sweet sound of a growing tail with lots of modulation, and width that opens wide while it decays. Happened upon this this while working on Skitter mode. Thing 1 is diffusion, thing 2 is size. 5.05 ( May 28, 2019 ) --------------------- - Updated automatic version detection system used for internal inventory tracking system. 5.04 ( February 23, 2019 ) ------------------------------------ - fixed spillover bug which occurred when you engaged the pedal from bypass in bank preset mode. - fixed: midi controller change messages were having their controller number zeroed before being passed through. 5.03 ( June 4, 2018 ) ------------------------------------ - V30 looper - lowered the sync timer so that stompswitch response has less latency. - changed combination stomp presses to happen on stompswitch press rather then release. - fixed choppiness in modulation modes. - fixed no octave sound in ambient green. 5.02 (not released yet) ----------------------- - V30 looper - hold the left and middle stompswitches for one second to clear the track - fixed a bug when trying to stop playback while looping. - added ability to tap left and middle stomp to navigate to previous track. - fixed bug that would occur if you recorded a very specific loop length of around 260 buffers. - volume knob now controls looper playback volume, when it's adjusted it in looper mode. - fixed tap tempo in delay+rev and reverse modes. - fixed MIDI issue with program changes causing preset 0 to be loaded (Thanks Brendan) - fixed amb blue not starting up with a delay sound (Thanks Daniel Eid). - made Ghost mode infinite hold a bit more controlled (volume doesn't swell as much). 5.01 (beta date: May 5, 2018) ----------------------------- -fixed MIDI 5.00 (beta date: May 4, 2018) ----------------------------------- - V30 looper - looper will corrupt whatever file system you have on the SD card, so don't use an SD card with important data on it! - works when effect is bypassed. - overdubbing implemented - always begin playing from start of loop - looper now requires a V30 SDHC card - fixed error with looper recording no sound after 20 seconds - presets can now be saved and loads from SD card - to save presets, make a directory in the root directory of the sd card called "from_reverb". On startup, Reverb will populate this directory with presets and the advanced config settings. - to load presets, make a directory in the root directory of the SD card called "to_reverb". Presets that are named NN_reverb.bin when NN is a number between 0 and 35 inclusive will be loaded into Reverb memory. - made shop tester easier to use 4.01 (beta date: Released on forum Sep 20, 2017) ------------------------------------------------ - first version of super beta multitrack looper. - merged with ES code. - tweaked the hacky preset spillover w/user suggestions. - added midi out of the knob and mode parameters to use with DAWs/Editors - added Advanced Config option for dryer mix taper under Hall Green. 1. wetter mix taper (default) 2. dryer mix taper (new) - fixed issue with trails sometimes not shutting off w/insert loop. 4.00 (beta date: May 30, 2017) ----------------------------- - added hacky preset spillover. (thanks Ian Jarrold and Rob Leishman) - added insert loop. (thanks Josh Cowell) - in advanced configuration, signal configuration now has four options. The last two are "Insert Pre Effect" and "Insert Post Effect" - right out/in acts as insert. - making infinite hold more infinite and less "infinite". (thanks Ian Jarrold) 3.04 (production date: February 24, 2017) ----------------------------------------- - fixed bug with shop tester that was failing good pedals. 3.03 (production date: December 12, 2016) ----------------------------------------- - "total lockdown" mode added to "knob lock" in advanced config. It's the 3rd option. It disables saving of presets. - fixed: dry signal was being momentarily cut when going from a full wet preset to bypass to full dry preset - shop tester was occasionally mis-writing factory settings 3.02 (production date: November 7, 2016) ---------------------------------------- - made shop tester easier to use 3.01 (production date: September 27, 2016) ------------------------------------------ - fixed bug with shop tester 3.00 (beta date: September 15, 2016) ------------------------------------ - added Glummer mode (Green Sparkle). Octave down and up. (thanks to Jim Quarnstrom) Thing controls are "octave down blend" and "octave up amount". - added Casper mode (Green Ghost). A friendlier less spooky ghost. (thanks to Landon Bailey) Thing controls are "modulation" and "diffusion". - added Destroyer Pad mode (Red Beer). For sternly communicating with misbehaving household appliances. (thanks to Josh Cowell) Things controls are "robot screams" and "pitch shift". 2.06 (beta date: August 25, 2016) --------------------------------- - fixed issue with advanced config option "Startup Engaged and load Preset 1" not working properly. (thanks to Brian Black) 2.05 (beta date: August 23, 2016) --------------------------------- - fixed issue with red reverse. Max tap tempo time was longer than max RAM available, which would cause very loud scary sounds. (thanks to Paul Uhl) 2.04 (beta date: July 26, 2016) ------------------------------- - fixed issue with mix taper when using digital dry (like in lo-fi mode or when cab sim is engaged) - fixed issue with big thing2 changes causing clicks in audio. Unfortunately the clicks are unavoidable in some modes with both thing1 and thing2 changes. - fixed issue with heavy midi input causing pedal to freeze. (thanks Josh Cowell) - started adding stuff for the upcoming looper. 2.03 (beta date: July 6, 2016) ------------------------------ - fixed expression pedal bug where assigning expression pedal to too many parameters was freezing pedal (thanks to Takeo Yamamoto) - chose mix taper from 2.01 due to popular vote. 2.01 and 2.02 (beta date: June 19, 2016) ---------------------------------------- - added Tremverb mode. It's the forth submode (yellow) of the modulation mode. (thanks to Frank Biewer) - can now change presets using a MIDI CC#11 message (thanks to Rob Leishman) - modified mix knob taper. 2.01 and 2.02 have slightly different tapers. Going to hold a poll in the Voting Forum to pick the winner (thanks to Travis Salisbury) 1.00 (production date: May 24, 2016) ------------------------------------ - initial release