Superdelay

Product is Discontinued

Overview

Sure it does basic delay sounds, and it sounds better than anything else out there while doing them. But if all you want is a simple delay pedal, the Empress Superdelay isn't for you. The Empress Superdelay is for musicians who want to be inspired by their pedals, not limited by them.

Video



Features

  • Killer Sound Quality - The Signal to Noise ratio is around 105dB.
  • 2.8 Seconds of Delay Time - For your extra long delays.
  • 8 modes - normal, tap, autoset (delay time is set by tempo played), reverse, rhythm mode (multitap), tape mode, misc (dynamic, gate), and 11 second looper.
  • Expression Pedal Input - allows you to control either mix or feedback with your foot.
  • High Pass/Low Pass Filter - high pass is good for electronic music, low pass is sweet for darker analog delay type sounds.
  • Fast/Slow Modulation - slow adds extra texture, fast is a little crazy.
  • 8 Presets - Settings can be saved to 8 presets. With three stompswitches, accessing the presets is easy.
  • Tap Tempo with Ratios - many of the modes use tap tempo, and the ratio selection makes fast in-time delay times easy.
  • True Bypass - The Empress Superdelay employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
  • Small Size - The enclosure measures approximately 5.7" by 3.75" by 1.75", which is delightfully small when considering all the features packed into this unit.

Soundclips

Soundclip #1 of the Superdelay delay pedal Normal delay with crazy feedback. (00:27 sec | 429 KB)
Soundclip #2 of the Superdelay delay pedal Multi tap delay. (00:25 sec | 402 KB)
Soundclip #3 of the Superdelay delay pedal Reverse delay. (00:46 sec | 727 KB)
Soundclip #4 of the Superdelay delay pedal Reverse double speed delay. (00:24 sec | 376 KB)

Specifications

Power Input Voltage 9 - 12 V DC (Positive tip)
Power Input Connector 2.1mm barrel connector (Positive tip)
Power Consumption ~300mA
Enclosure Material Die Cast Aluminum
Input connector 1/4" Jack
Output connector 1/4" Jack
Height (Enclosure only) 1.75"
Height (including controls) 2.25"
Length 5.7"
Width 3.75"
weight 1.5 lb
Signal to noise ratio 105dB